Projects notes
-
ADR1399 Reference & Precision Buffer
An always-on DC voltage reference box built around an ADR1399 module, with extra outputs from a surplus HP precision resistor network and my own bipolar 4-wire buffer. It gives my bench a stable 10 V, 5 V, 1 V and 0.1 V to compare my meters against.
-
Cognitive Workload Tool
An open-source tool that estimates cognitive workload from pupil size outside the lab. It works out how large the pupil should be for the light reaching the eye and keeps only what the light does not explain.
-
Mettler PM EEPROM tool
An open-source tool to read, decode and edit the parameter EEPROM of Mettler AM/PM precision balances, so that these instruments can be serviced without the ServicePac adjustment cassette that is now almost impossible to find.
-
Portable dbx Encoder/Decoder
PG-NR-02, a 9 V battery-powered dbx Type II encoder/decoder with a discrete electret microphone preamp, built around the Panasonic AN6291 to bring dbx noise reduction to portable cassette recorders like the Sony WM-D6C. Open hardware, designed in KiCad.
-
PA88 High-Voltage Amplifier
A ×20 DC-coupled amplifier built around the Apex PA88 that turns the ±10 V of my HP 3245A into about ±200 V. A precision op amp in the loop corrects its offset, so it can be used for calibration work, not only as a power stage.
-
Ambient Contrast Analyser
A web tool that estimates how readable text on an LCD screen is under different ambient light. It extends the WCAG contrast check, which ignores the device and the lighting.
-
PsychoPy on a Raspberry Pi
Running PsychoPy experiments on a Raspberry Pi 3: an inexpensive, reproducible setup that is quiet and easy to clone, with clear limits on timing and stimulus complexity.